29
2023
-
03
Dimensional tolerance of stamped parts
Author：
The GB/T13914-2002 Dimensional Tolerances for Stamped Parts specifies the dimensional tolerances for stamped parts. Dimensional tolerances are specified separately for flat stamped parts and formed stamped parts. The dimensional tolerance value of stamping parts is related to the dimensions of stamping parts and plate thickness, and on the other hand, it is related to the accuracy level.
Dimensional tolerance of flat stamped parts: divided into 11 levels, represented by ST1 to ST11, where ST represents the dimensional tolerance of flat stamped parts, and the tolerance level code is represented by Arabic numerals. The accuracy level decreases sequentially from ST1 to ST11.
Dimensional tolerance of formed stamping parts: Formed stamping parts are divided into 10 accuracy levels, represented by FT1 to FT10, where FT represents the dimensional tolerance of formed stamping parts and Arabic numerals represent the tolerance level. The accuracy level decreases sequentially from FT1 to FT10.
Limit deviation of stamping parts: the hole size is 0 when pressed down, and the upper deviation is the lower deviation plus dimensional tolerance; The upper deviation of the shaft size is the basic deviation, with a value of 0, and the lower deviation is the upper deviation minus the dimensional tolerance. The upper and lower deviations of hole center distance, hole edge distance, bending, drawing length, height, etc. are specified as half of the dimensional tolerance.
Related news
Design principles of hardware stamping parts
2023-03-29
Application field of hardware stamping parts
2023-03-29
Main characteristics of stamping parts
2023-03-29
Inspection methods for stamped parts
2023-03-29
Flipping and twisting of stamping parts
2023-03-29
Dimensional tolerance of stamped parts
2023-03-29